Subscribe

Cosworth Supercharger for Scion FR-S BRZ Released

Cosworth Stage 2 Supercharger for FRS BRZ

Cosworth brings the latest forced induction option to the Scion FR-S and Subaru BRZ: the Stage 2 Power Package. The Cosworth supercharger is a positive displacement roots style supercharger which provides boost at all rpm ranges, perfect for SCCA and driving styles that require instant response. The new FR-S BRZ performance supercharger package comes complete with a new intake manifold that houses two air to water intercooler cores.

The Cosworth supercharger kit is available for purchase now and we look forward to providing this kit, installation and custom tuning to Scion FR-S and Subaru BRZs looking for a performance increase.

Click for more information on the Cosworth Supercharger and to purchase from FRSMOD.com

Dynosty November 16th, 2014 Filed in Products No Responses

355WHP Scion FR-S on GTX28 Turbo and E85

What was a relatively stock FR-S was completely transformed with high performance upgrades including Garrett GTX28 turbo kit and supporting modifications. We installed the billet-wheel turbo kit and full exhaust system, as well as larger injectors, fuel pump, and an upgraded ACT clutch and flywheel package. With the right performance parts, this FR-S was ready to hit the dyno.

Using EcuTek, Hal managed 264whp on 93octane gas from the high compression FA20 engine. With E85 in the tank we increased boost to 13psi and dialed the tune in to 355whp on our Dyno Dynamics. On a Dynojet this would be 300WHP pump gas and 400WHP E85.

Scion FRS GTX28 Turbo engine bay at Dynosty

Scion FRS GTX28 Turbo E85 dyno chart 355whp

Dynosty December 12th, 2013 Filed in Dyno Tune No Responses

Greddy Turbo Scion FR-S Doubles Factory Horsepower

Greddy Turbo Scion FRS at Dynosty

With the installation of a Greddy Turbo Kit on a 2013 Scion FR-S along with supporting mods and dyno tune, we were impressed to achieve 315WHP DynoDynamics, more than double the factory FR-S BRZ wheel-horsepower! The FRS was modified with high performance parts including a Greddy Turbo Kit, Tial blow off valve, Dynosty fuel upgrades (550cc injectors and pump), over pipe, front pipe, and Dynosty tune using EcuTek. The FR-S gas tank was drained of pump gas and filled with E85. Greddy uses a Mitsubishi turbocharger, which is perfectly matched to the FR-S BRZ FA20 engine for rapid spool and practically no lag. This combination helps the lack of power normally found at lower RPM, and is a great street-car turbo kit. See the Greddy FRS Turbo Kit low boost verse high boost comparison below. The Greddy kit utilizes an internal wastegate, so more boost would require modifications to the internal wastegate or upgrading to an external wastegate. This Scion FR-S Turbo Kit fits great, and installs on Subaru BRZ as well.

Scion FR-S Greddy Turbo Kit Low Boost vs High Boost
Greddy Turbo Scion FRS dyno low boost high boost E85 at Dynosty

Scion FR-S Greddy Turbo Kit Engine Bay Picture
Greddy Turbo Scion FRS engine bay at Dynosty

Scion FR-S Greddy Turbo Kit Header Picture
Greddy Turbo Scion FRS header at Dynosty

Dynosty December 9th, 2013 Filed in Dyno Tune No Responses

530WHP 439TQ Scion FR-S Dyno Tune

Dynosty_on_site_dyno_tuning_antigua_920
This built Toyota 86 (Scion FR-S in USA) is a great example of what the FR-S is capable of. The setup consists of a built 2.0L FA20 engine that houses CP Pistons, Pauter Rods and Dynosty head studs. Airflow is provided by a Garrett GTX3076 on an upgraded Full Blown turbo kit, and escapes through a Motiv Concepts over pipe, front pipe, and Greddy exhaust. The engine is controlled by a Haltech plug&play standalone ems for ignition and port injection control. Direct injection is retained and controlled by tuning through EcuTek. Hal was flown in to handle the dyno tuning portion on-site in Antigua, and ended with a turbo FR-S producing 370WHP Dynojet on pump gas, and 530WHP on VP race gas.

Congratulations to the hard-working team in Antigua on impressive dyno results, and thank you for your hospitality. Quite an impressive tuner car scene on the island, and beautiful place to visit. Once the bugs get worked out and sticky tires are installed, we expect to see this high performance FR-S fly down the track!

Video of the turbo FR-S dyno pull is below the pictures.

Toyota 86 built turbo on dyno

530whp 439tq built Toyota 86 turbo dyno tune

Dynosty December 3rd, 2013 Filed in Dyno Tune No Responses

Black Friday FRS BRZ Greddy MXP Deals

2013 Black Friday promotions for Scion FR-S and Subaru BRZ
FRSMOD.com
Check back next year!

Dynosty November 29th, 2013 Filed in Products No Responses

GReddy Turbo Kit for Scion FR-S and BRZ

Just released, the GReddy Tuner Turbo Kit for Scion FR-S, Subaru BRZ and Toyota 86 is now available! This tuner turbo kit gained 93 wheel horsepower at 7psi during Greddy’s dyno testing. Call us to order today, or buy online at FRSMOD.com

Greddy Turbo Kit front bumper shot for FRS BRZ from FRSMOD

Greddy Turbo Kit parts for FRS BRZ from FRSMOD

Dynosty May 23rd, 2013 Filed in Products No Responses

New Billet Dampened Fuel Rails for FR-S BRZ

Dynosty is proud to release the first set of fuel rails for the FA20 engine in the Scion FR-S, Subaru BRZ and Toyota 86. Effort was made to include the OEM fuel dampers to prevent fuel dead spots and tuning issues. Available in OEM returnless and return fuel styles, as well as an option to connect to the stock feed hardline. Available online at FRSMOD.com or call 502-384-8882. Stay tuned for more FRS BRZ fuel upgrades coming soon.

Dynosty Fuel Rails with Dampers for FA20 FRS BRZ

Dynosty May 5th, 2013 Filed in Products No Responses

Upgraded Hose Kit Now Available for FRS BRZ

Dynosty and FRSMOD worked with Venair to bring you an upgraded cooling hose solution for your FA20 engine. Made of strong multilayer silicone construction. Coolant hoses available in red, blue and black colors. Fits Scion FR-S and Subaru BRZ.

Click here to buy this Scion FR-S Subaru BRZ Silicone cooling hose kit on FRSMOD.com

Venair Cooling Hose Kit for FRS BRZ 86 from FRSMOD

Dynosty January 16th, 2013 Filed in Products No Responses

FRS BRZ Performance Axles from Driveshaft Shop

Driveshaft Shop just releaesed their 500HP capable axles for the Scion FR-S, Subaru BRZ and Toyota 86. These are a great upgrade to keep in mind as you boost the performance of your 2.0L FA20 engine to ensure reliable performance.

Available now for purchase at FRSMOD.com
Driveshaft Shop DSS axles for FRS BRZ 86

Carbon Fiber and Aluminum one piece driveshafts coming soon!

Dynosty December 10th, 2012 Filed in Products No Responses

Scion FR-S Subaru BRZ Products

Dynosty is your source for all Scion FR-S and Subaru BRZ performance parts! Call us at Dynosty to order, 502-384-8882.

Here are a few of the new FA20 items we are installing on our project FR-S…

Clutch Masters FX400 6 Puck Sprung Clutch Disc, Pressure Plate and Flywheel for FA20 in Scion FRS and Subaru BRZ (total weight 26 pounds):

Agency Power Header for FA20 in Scion FRS and Subaru BRZ:

Deatschwerks DW65 Fuel Pump upgrade for Scion FR-S and Subaru BRZ (some modifications required to install. Call for more info):

Colder Spark Plugs for FA20 boxer engine, heat range 10! Direct fire!

Dynosty August 20th, 2012 Filed in Products 3 Responses